Renewable energy

Results 51–75 of 114
Date Inputs. Currently set to enter a start and end date.
Current Filters Clear all

Thor’s hammer to crush materials at 1 million atmospheres

January 5, 2016 • Sophisticated features may influence eventual Z-machine rebuildALBUQUERQUE, N.M. — A new Sandia National Laboratories accelerator called Thor is expected to be 40 times more efficient than Sandia’s Z machine, the world’s largest and most powerful pulsed-power accelerat…

Chemical engineer named University of New Mexico distinguished alumna

October 14, 2015 • ALBUQUERQUE, N.M. — The director of Sandia National Laboratories’ Energy Technologies and System Solutions Center has received a Distinguished Alumni Award from the University of New Mexico (UNM) School of Engineering. Carol Adkins was honored as one of seven distinguished alumni recognized this year for her significant impact on UNM’s...
Carol Adkins

New arena of power generation set in motion with MOU

August 20, 2015 • ALBUQUERQUE, N.M. — Sandia National Laboratories and eight other companies and research organizations will collaborate to advance a distributed power system that can produce cleaner, more efficient electricity. The memorandum of understanding focuses on the development of a fossil-fueled energy system based on supercritical carbon dioxide (S-CO2) Brayton cycle technology....
Brayton cycle lab

Testing heats up at Sandia’s Solar Tower with high temperature falling particle receiver

July 1, 2015 • ALBUQUERQUE, N.M. — Researchers at Sandia National Laboratories are working to lower the cost of solar energy systems and improve efficiencies in a big way, thanks to a system of small particles. This month, engineers lifted Sandia’s continuously recirculating falling particle receiver to the top of the tower at the...
Receiver on tower

Sandia’s Z machine receives funding aimed at fusion energy

June 29, 2015 • ALBUQUERQUE, N.M. — A two-year, $3.8 million award has been received by Sandia National Laboratories and the University of Rochester’s Laboratory for Laser Energetics (LLE) to hasten the day of low-cost, high-yield fusion reactions for energy purposes. High-yield means much more energy emerging from a fusion reaction than is put...
Amplified light passes through the large tubes of Sandia National Laboratories’ Z-Beamlet laser, one of the most powerful in the world.

Sandia finds shared opportunities for natural gas and hydrogen fuel cell vehicle markets

March 10, 2015 • LIVERMORE, Calif.—Fueling stations that offer both hydrogen and natural gas could benefit distributors of both fuel types, says a new Sandia National Laboratories report, “Transitioning the Transportation Sector: Exploring the Intersection of Hydrogen Fuel Cell and Natur…

Combining ‘Tinkertoy’ materials with solar cells for increased photovoltaic efficiency

November 3, 2014 • LIVERMORE, Calif. — Researchers at Sandia National Laboratories have received a $1.2 million award from the U.S. Department of Energy’s SunShot Initiative to develop a technique that they believe will significantly improve the efficiencies of photovoltaic materials and h…
Sandia National Laboratories researcher Vitalie Stavila inserts a substrate patterned with electrodes into a temperature-controlled liquid-phase reactor for depositing MOF thin films. Sandia's research team plans to combine MOFs with dye-sensitized solar cells, a technique it believes will lead to advancements in photovoltaic technology. (Photo by Dino Vournas)

Evaluating powerful batteries for modular grid energy storage

October 24, 2014 • ALBUQUERQUE, N.M. — Sandia National Laboratories has begun lab-based characterization of TransPower’s GridSaver, the largest grid energy storage system analyzed at Sandia’s Energy Storage Test Pad in Albuquerque, N.M. Project lead David Rosewater said Sandia will evaluate the 1 megawatt, lithium-ion grid energy storage system for capacity, power, safety and...
GridSaver testing array

American-made wind turbine blades

September 17, 2014, Media Advisory • ALBUQUERQUE, N.M. — Sandia National Laboratories is helping makers of wind turbine blades improve the labor productivity associated with blade fabrication and finishing. This improved productivity makes domestic blades more cost competitive with blades from countries that pay workers lower wages. The Advanced Manufacturing Innovation Initiative (AMII), a three-year $6.3...

Clearing up cloudy understanding on solar power plant output

March 19, 2014 • ALBUQUERQUE, N.M. – Sandia National Laboratories engineers have been studying the most effective ways to use solar photovoltaic (PV) arrays — a clean, affordable and renewable way to keep the power on. Systems are relatively easy to install and have relatively small main…

Sandia Labs harnessing the sun’s energy with tiny particles

September 16, 2013, Media Advisory • [caption id="" align="alignright" width="313"] Joshua Mark Christian working with the falling particle receiver, which more efficiently converts the sun’s energy to electricity in large-scale, concentrating solar power plants. (Photo by Randy Montoya) Click on the thumbnai…
Falling particle receiver

Sandia wins three R&D 100 awards

July 8, 2013 • ALBUQUERQUE, N.M. — Sandia National Laboratories researchers — competing in an international pool of universities, corporations and government labs — captured three R&D 100 Awards in this year’s contest. R&D Magazine presents the awards each year to researchers whom its editors and independent judging panels determine have developed the year’s...

Improving the reliability and resiliency of Hoboken’s electric grid in aftermath of Hurricane Sandy

July 3, 2013 • ALBUQUERQUE, N.M. — Sandia will help East Coast communities devastated by Hurricane Sandy boost the resiliency of their electric grids, so they can be better prepared to deal with natural disasters in the future. Sandia’s Energy Surety Design Methodology (ESDM) is a quantitative, risk-based assessment approach that has been applied...

Solar test facility upgrades complete, lead to better capabilities at Sandia for power industry

November 13, 2012 • [caption id="" align="alignright" width="250" caption="The Molten Salt Test Loop is the only test facility in the country that can provide real power plant conditions and collect data about the interactions of pressure, temperature and flow rates. (Photo by Randy Montoya) Cl…
Molten Salt Test Loop

Sandia to co-host international workshop on photovoltaics integration

October 29, 2012 • Sandia National Laboratories, the Electric Power Research Institute (EPRI) and European Distributed Energies Research Laboratories (DERlab) have organized a workshop on utility operating experience with high-penetration levels of solar photovoltaics (PV). The workshop, “Utility Experience with High Penetration PV,” is scheduled Monday, Dec. 3, in Berlin. The workshop will take...

Sandia solar researcher chosen as one of continent’s ten most brilliant scientists

September 24, 2012 • ALBUQUERQUE, N.M. — Sandia researcher Greg Nielson is “one of the 10 most promising young scientists working today,” says Popular Science magazine. Nielson garnered one of the magazine’s “Brilliant 10” awards for helping lead the Sandia effort to create solar cells the size of glitter. Past Brilliant 10 honorees have...

Increased productivity, not less energy use, results from more efficient lighting

August 6, 2012 • ALBUQUERQUE, N.M. — Two researchers have reprised in the journal Energy Policy their groundbreaking finding that improvements in lighting —  from candles to gas lamps to electric bulbs  — historically have led to increased light consumption rather than lower overall energy use by society. In an article in the journal...
Sandia researcher Jeff Tsao examines the set-up used to test diode lasers as an alternative to LED lighting. Skeptics felt laser light would be too harsh to be acceptable. Research by Tsao and colleagues suggests the skeptics were wrong.

Sandia SolarTrak technology helps arrays worldwide follow the sun

July 3, 2012 • ALBUQUERQUE, N.M. – When Alex Maish was a researcher at Sandia National Laboratories in the early 1980s, he had a pet project, a low-cost, high-precision way to continuously move solar panels into the best possible position to catch sunlight and generate energy. By the early 1990s the technology was ready...

Sandia engineer named DOE Energy Pioneer

July 2, 2012 • ALBUQUERQUE, N.M. — The U.S. Department of Energy named Chris Evans an Energy Pioneer for his work in identifying and implementing energy conservation practices at Sandia National Laboratories. The award recognizes people who go above and beyond their jobs in energy management for the federal government. Evans has been involved...

Sandia wins four R&D 100 Awards

June 20, 2012 • ALBUQUERQUE, N.M. — Sandia National Laboratories researchers — competing in an international pool of universities, corporations and government labs — captured four prestigious R&D 100 Awards in this year’s contest. R&D Magazine presents the awards each year to researchers whom its editors and independent judging panels determine have developed the year’s...
Neutron generator
Results 51–75 of 114