Science / Technology / Engineering

Results 251–275 of 1,244
Date Inputs. Currently set to enter a start and end date.
–
Current Filters Clear all

Solar tower exposes materials to intense heat to test thermal response
June 21, 2018 • ALBUQUERQUE, N.M. — Sandia National Laboratories is using its solar tower to help assess the impact of extreme temperature changes on materials. The tests, now in their second year, take advantage of the ability of Sandia’s National Solar Thermal Test Facility to simulate a very rapid increase in temperature followed...
Categories: Military / Defense, Science / Technology / Engineering
Topics: , , , ,
Tower tests photo

Arm-based supercomputer prototype to be deployed at Sandia National Laboratories by DOE
June 18, 2018 • ALBUQUERQUE, N.M. — Microprocessors designed by Arm are ubiquitous in automobile electronics, cellphones and other embedded applications, but until recently they have not provided the performance necessary to make them practical for high-performance computing. Astra, one of the first supercomputers to use processors based on the Arm architecture in a...
Categories: Computing, Science / Technology / Engineering
Topics: , , ,
Astra ARM Supercomputer

How microgrids could boost resilience in New Orleans
June 14, 2018 • ALBUQUERQUE, N.M. — During Hurricane Katrina and other severe storms that have hit New Orleans, power outages, flooding and wind damage combined to cut off people from clean drinking water, food, medical care, shelter, prescriptions and other vital services. In a year-long project, researchers at Sandia and Los Alamos national...
Categories: Energy / Environment / Water, Science / Technology / Engineering
Topics: , , ,
Microgrid researcher

Sandia computational mathematician named SIAM fellow
June 13, 2018 • ALBUQUERQUE, N.M. — Sandia National Laboratories computational scientist and mathematician John Shadid has been named a 2018 fellow of the Society for Industrial and Applied Mathematics. Shadid’s selection by SIAM was based upon his research on solution methods for multiphysics systems, scalable parallel numerical algorithms and numerical methods for strongly...
Categories: Awards, Computing, Science / Technology / Engineering
Topics: , , , , ,
John Shadid

Sandia’s robotic work cell conducts high-throughput testing ‘in an instant’
June 11, 2018 • ALBUQUERQUE, N.M. — Today with 3D printing you can make almost anything in a matter of hours. However, making sure that part works reliably takes weeks or even months. Until now. Sandia National Laboratories has designed and built a six-sided work cell, similar to a circular desk, with a commercial...
Categories: Materials Science, Science / Technology / Engineering
Topics: , , , , , , , , ,
Brad Boyce watches a yellow commercial robot scan a 3D-printed test part with blue light.

Sandia’s Robot Rodeo provides training for bomb squads
June 8, 2018 • ALBUQUERQUE, N.M. — For a dozen years, robotics experts from the national laboratories have shared their skill with first responders who use robots for hazardous tasks by coordinating annual training competitions to help prepare them for dangerous real-world situations. Next week, Sandia National Laboratories will host the 12th annual Western...
Categories: Science / Technology / Engineering
Topics: , , , , , ,
Foreground: Robot holding an orange bucket. Background: Puddle of water and a robot by some pipes. General messy workshop space around.

Catching dreams
June 7, 2018 • ALBUQUERQUE, N.M. — Sandia National Laboratories in a new partnership with New Mexico Mathematics, Engineering, and Science Achievement, or NM MESA, has increased the number of students in Sandia’s Dream Catchers Science Program. The latest hands-on science and engineering program was recently held at the University of New Mexico-Gallup campus....
Categories: Community / Education, Media advisories, Science / Technology / Engineering
Topics: , , , , , , , , , , , ,

Sandia team designs in a new way for additive manufacturing
May 29, 2018 • ALBUQUERQUE, N.M. — A Sandia National Laboratories team built a telescope to demonstrate how to design for additive manufacturing, familiarly known as 3D printing, to take advantage of the technique’s strengths and weaknesses. Sandia’s three-year Laboratory Directed Research and Development project proved the feasibility of using additive manufacturing as an...
Categories: Science / Technology / Engineering
Topics: , , ,
Sandia National Laboratories project lead Ted Winrow with the telescope he and his team built using advanced manufacturing techniques.

Raising the heat to lower the cost of solar energy
May 21, 2018 • ALBUQUERQUE, N.M. — Sandia National Laboratories will receive $10.5 million from the Department of Energy to research and design a cheaper and more efficient solar energy system. The work focuses on refining a specific type of utility-scale solar energy technology that uses mirrors to reflect and concentrate sunlight onto a...
Categories: Energy / Environment / Water, Renewable energy, Science / Technology / Engineering
Topics: , , ,
Falling particle receiver video

Riding bacterium to the bank
May 17, 2018 • LIVERMORE, Calif. — What does jet fuel have in common with pantyhose and plastic soda bottles? They’re all products currently derived from petroleum. Sandia National Laboratories scientists have demonstrated a new technology based on bioengineered bacteria that could make it economically feasible to produce all three from renewable plant sources....
Categories: Bioscience / Medical Research, Renewable energy, Science / Technology / Engineering
Topics: , ,

Exascale Earth-modeling system is ready to make high-fidelity predictions for energy
April 27, 2018 • ALBUQUERQUE, N.M. — An Earth modeling system developed over the last four years and unveiled Monday is expected to have one of the finest resolutions ever achieved by supercomputers simulating aspects of the planet’s climate, said Sandia National Laboratories researcher Mark Taylor, the project’s chief computational scientist. The Energy Exascale...
Categories: Climate Change, Computing, Energy / Environment / Water, Science / Technology / Engineering
Topics: , , ,
ES3M

Exploring Arctic clues to secure future with new Sandia, university partnership
April 23, 2018 • ALBUQUERQUE, N.M. — The Arctic is undergoing rapid change, with sea ice melting and temperatures rising at a faster pace than anywhere else in the world. Its changing environment affects global security, politics, the economy and the climate. Understanding these changes is crucial for shaping and safeguarding U.S. security in...
Categories: Climate Change, Energy / Environment / Water, Homeland security, Science / Technology / Engineering
Topics: , , , ,

Biologically inspired membrane purges coal-fired smoke of greenhouse gases
April 11, 2018 • ALBUQUERQUE, N.M. — A biologically inspired membrane intended to cleanse carbon dioxide almost completely from the smoke of coal-fired power plants has been developed by scientists at Sandia National Laboratories and the University of New Mexico.[caption id="" align="align…
Categories: Climate Change, Energy / Environment / Water, Nanotechnology, Science / Technology / Engineering
Topics: , , , , , , , , ,

Sandia measurements expert named Asian American Engineer of the Year
April 10, 2018 • ALBUQUERQUE, N.M. — Sandia National Laboratories senior scientist Hy Tran has been named a 2018 Asian American Engineer of the Year. The award is sponsored by the Chinese Institute of Engineers-USA to salute Asian-American professionals in science, technology, engineering and math who demonstrate exceptional leadership, technical achievements and public service....
Categories: Awards, Science / Technology / Engineering
Topics: , , , , , , , , , ,

New chemical mechanisms identified on road to cleaner, more efficient combustion
March 8, 2018 • LIVERMORE, Calif. — Sandia National Laboratories researchers have identified key chemical mechanisms for the first time that add to the fundamental knowledge of combustion chemistry and might lead to cleaner combustion in engines. Sandia researcher Nils Hansen and former postdoctoral appointee Kai Moshammer focused on low-temperature oxidation of hydrocarbons and...
Categories: Chemistry, Science / Technology / Engineering, Transportation
Topics: , , , ,
Researcher Nils Hansen

Sandia researcher Jacqueline Chen elected to National Academy of Engineering
February 28, 2018 • LIVERMORE, Calif. — Jacqueline Chen, a distinguished member of the technical staff at Sandia National Laboratories, has been elected to the National Academy of Engineering. Chen is among the 99 new members from around the globe in the 2018 class. Election to the National Academy of Engineering is the highest...
Categories: Science / Technology / Engineering
Topics: , , , ,
Jacqueline Chen

Students to learn about Sandia’s global security work during state STEM event
February 26, 2018 • [caption id="" align="alignright" width="250"] Students learned about sticky foam during the Sandia National Laboratories STEM Day in 2017. Sticky foam was first developed at Sandia in the late 1970s and used for security applications. (Photo by Randy Montoya) Click the thum…
Categories: Community / Education, Media advisories, Science / Technology / Engineering
Topics: , , , , ,

First Sandia employee honored as 2018 LGBTQ+ Scientist of the Year
February 16, 2018 • ALBUQUERQUE, N.M. — Sandia National Laboratories physicist Danelle Tanner has been named the 2018 Scientist of the Year by the National Organization of Gay and Lesbian Scientists and Technical Professionals. She is the first labs employee to receive the honor since the NOGLSTP created the award in 2004. The annual...
Categories: Awards, Science / Technology / Engineering
Topics: , , , ,

National Hispanic engineering organization honors two Sandia engineers
February 5, 2018 • ALBUQUERQUE, N.M. — The technical achievements of two Sandia National Laboratories weapons engineers have been recognized by Great Minds in STEM, an organization supporting careers in science, technology, engineering and math. Systems analysis manager Steven Trujillo was awarded for his professional achievements and Humberto Santacruz, a lead engineer on Sandia’s...
Categories: Awards, Science / Technology / Engineering
Topics: , , , , , , ,
Santacruz and Trujillo photo

New radiation detectors developed at Sandia used for New START inspections
February 1, 2018 • ALBUQUERQUE, N.M. — Sandia National Laboratories designed, tested and delivered new radiation detection equipment for monitoring under the New START Treaty. Defense Threat Reduction Agency inspectors recently used this equipment for the first time in Russia for a New START inspection. New START, or the New Strategic Arms Reduction Treaty,...
Categories: Nonproliferation, Science / Technology / Engineering
Topics: , , ,
A man in profile scans three white canisters with a brass box -- the new neutron detection equipment

Sandia donates $25,000 to Valley Children’s Museum
January 31, 2018 • LIVERMORE, Calif. — Sandia National Laboratories has donated $25,000 to the Valley Children’s Museum in Dublin, California. The grant, made possible through Sandia’s gifts and grants program, will be used to update the museum’s exhibit space and curriculum with engineering-themed activities. “Sandia is honored to be a partner in bringing...
Categories: Community / Education, Science / Technology / Engineering
Topics: , , , ,
Valley Children’s Museum donation

Researchers at Sandia work on new way to image brain
January 18, 2018 • ALBUQUERQUE, N.M. — Sandia National Laboratories researchers want to use small magnetic sensors to image the brain in a way that’s simpler and less expensive than the magnetoencephalography system now used. Magnetoencephalography is a noninvasive way to measure tiny magnetic fields produced by the brain’s electrical activity. The measurements, able...
Categories: Bioscience / Medical Research, Science / Technology / Engineering
Topics: , , , , , ,

New Sandia balloon-borne infrasound sensor array detects explosions
January 11, 2018 • ALBUQUERQUE, N.M. — Sheets of plastic similar to that used for garbage bags, packing tape, some string, a little charcoal dust and a white shoebox-size box are more than odds and ends. These are the supplies Danny Bowman, a Sandia National Laboratories geophysicist, needs to build a solar-powered hot air...
Categories: Science / Technology / Engineering, Space / Astronomy
Topics: , , ,
Danny Bowman holding a stryofoam box (left) Sarah Albert holding an infrasound sensor (right) with a bright blue sky as background

Small, NM businesses key factor in Sandia’s 2017 economic impact
January 10, 2018 • ALBUQUERQUE, N.M. — Sandia National Laboratories increased its spending with small companies in New Mexico and nationwide in fiscal year 2017, according to the labs’ latest economic impact report. “These annual numbers show that Sandia continues to make a positive impact on the New Mexico and national economies, particularly through...
Categories: Science / Technology / Engineering, Technology transfer / Economic Impact
Topics: , , , ,
Results 251–275 of 1,244